|
Hybrid
Includes both a Mac and Windows version of the program.
|
Please note that all Waves products now require an "iLok" USB smart key.
Waves does not include an iLok with their products. You may use an existing iLok, or purchase a new one.
This product is available for Electronic Delivery. Once we have processed your order, we will e-mail you the serial number and you can start using your plug-in right away! We will remove the shipping charge for this item from your order before we charge your credit card. If you prefer to receive the box, please indicate "boxed version" in the comments section of your order. (Academic Editions are not available for Electronic Delivery.)
The 2254. The 1066. The 1073. The 1081. To most people, those are just numbers. To audio professionals, they are hardware legends.
Presenting Waves V-Series: Three state-of-the-art Vintage models that capture the sound of the consoles found in the world’s most exclusive recording studios. The big budget sound—at your fingertips.
V-Comp – Vintage meets the future
Using a fixed nominal output gain and time constants, the V-Comp recreates the rich lush buss sound of the vintage 2254 hardware compressor. This super-responsive dynamics processor packs a recognizable musical punch heard on countless hit records. Its controlled, gentle compression can really glue a mix together.
Controls:
- Input - Adjusts input level -24 dB to +18 dB in 0.1 dB increments.
- Output - Sets the output level, continuously adjustable ±18 dB.
- Meter switch - Selects mode of meter display: Input; Output or Gain Reduction
- Meter Display - Displays input, output, or gain reduction levels.
- Analog Switch - Controls the relative amount of analogue modeling.
- Settings: Off, 25%, 50%, 100% (full analog modeling)
- Compress - Turns the compressor on and off.
- Ratio - Sets the compression ratio of the compressor.
- Settings: 1.5:1, 2:1, 3:1, 4:1, 6:1
- Release - Sets the release time of the compressor.
- Settings: 400ms, 800ms, 1.5s, Auto.
- DeEsser - Turns the compressor into a simple de-esser.
- Limit - Turns the limiter on and off.
- Limit Level - Sets the threshold of the limiter.
- Adjustable from +4 dBu to +12 dBu in 0.5 dB steps.
- Attack - Adjusts the attack speed of the limiter.
- Fast = 1 microsecond; Slow = 1 millisecond
- Release - Adjusts the release time of the limiter.
- Settings: 100 ms, 200 ms, 800 ms, Auto
V-EQ3 – Vintage meets the future
Combining the best characteristics from two of the world’s most desirable console modules, the 1073 and 1066, this 3-Band EQ, with its classic cutoff points and adjustable High Pass Filter, is ideal for mixing and mastering. With the V-EQ3, it’s never been easier to achieve the rich classic sound of the ‘60s and ‘70s.
Controls:
- HP - High Pass Filter gain and cutoff
- Gain: up to -18 dB/octave
- 7 cutoff points (Hz): 45, 50, 70, 80, 160, 300, 360
- EQL - Equalizer on/off switch
- PHASE - Reverses output signal phase
- LF - Low Frequency gain and cutoff
- Continuously adjustable gain: up to ±18 dB
- 5 cutoff points (Hz): 35, 60, 100, 110, 220
- Slope: ±18 dB per octave
- MF - Middle Frequency gain and cutoff
- Continuously adjustable gain: up to ±18 dB
- 9 cutoff points (kHz): 0.36, 0.70, 1.2, 1.6, 3.2, 3.8, 4.8, 7.0, 7.2
- HF - shelf filter gain and cutoff
- variable gain: ±18 dB
- cutoff points: 10 kHz or 12 kHz
- OUTPUT - Controls output level in 0.1 dB increments from -18 dB to +18 dB
- TRIM METER / RESET - Displays peak output in dBFS, resets Trim
- ANALOG - Analog modeling on/off
V-EQ4 – Vintage meets the future
Modeled on the highly sought-after 1081 console module, this classic 4-band equalizer features detailed high frequency boosts plus High Pass and Low Pass Filters. The V-EQ4 captures the characteristic sound of vintage analog gear while providing the limitless flexibility and versatility of the digital environment.
Controls:
- LP/HP - Selectable Lowpass or Highpass filter
- 5 HP cutoff points (Hz): 27, 47, 82, 150, 270
- 5 LP cutoff points (kHz): 18, 12, 8.7, 5.6, 3.9
- LF - Low Frequency gain and cutoff
- Switchable between shelf (default) and bell
- Continuously adjustable boost/cut up to ±18 dB
- 5 cutoff points (Hz): 33, 56, 100, 180, 300
- Slope: ±18 dB per octave
- EQ - Equalizer on/off switch
- PHASE - Reverses output signal phase
- SHELF/BELL - Sets the LF and HF curve shapes
- LMF - Low middle frequency gain and cutoff
- High Q Bell continuously adjustable gain ±18 dB
- 10 cutoff points (Hz): 220, 270, 330, 390, 470, 560, 680, 820, 1000, 1200
- Hi-Q - Sets LMF or HMF bell curves to a higher Q (LMF ±12dB / HMF ±18dB)
- HMF - High Middle Frequency gain and cutoff
- High Q Bell gain adjustment, continuously adjustable ±18 dB
- 9 cutoff points (kHz): 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 8.2
- HF - High Frequency filter gain and cutoff
- Switchable between shelf (default) and bell
- Continuously variable gain ±18 dB
- 5 cutoff points (kHz): 3.3, 4.7, 6.8, 10, 15
- OUTPUT - Controls output level in 0.1 dB increments from -18 dB to +18 dB
- TRIM METER / RESET - Displays peak output, measured in dBFS, resets Trim
- ANALOG - Analog modeling on/off
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
| Academic - school purchase order required - Buy |
Our price: Please call/e-mail for academic pricing.
|
|
PC
|
Mac
|
|
Intel P4 2.8 GHz or AMD Athlon XP 3 GHz
512 MB
Win XP 32-bit & SP1/SP2
Win 2000 & SP4
Screen Resolution: 1024 X 768 32-Bit
|
G4 1.25 GHz
512 MB
OS-X 10.4.3
Screen Resolution: 1024 X 768 32-Bit
Intel-based Mac:
Core Due 1.66
512 MB
OS-X 10.4.7
Screen Resolution: 1024 X 768 32-Bit
|
