|
Both
Available for both Mac and Windows. You will receive the version you specify in the check-out process.
|
Free mic stand! While supplies last, receive a free A-379 microphone stand when you purchase any microphone over $199 from Kelly’s Music & Computers! (Offer valid only in the US, lower 48 states. Not valid in Canada or outside the US. While supplies last.)
Almost small enough to put in your pocket, this handy mixer is built to EDIROL’s high standards, and it’s ready to travel. With a choice of 1/4" and RCA inputs and outputs, the M-10MX lets you mix wherever you go.
-Compact and portable, perfect for mobile/field use
-Wide range of analog inputs and outputs, including 2 TRS 1/4" output jacks
-24-bit/96kHz S/PDIF coaxial and optical outputs
-Battery or AC power (AC adaptor included)
Compact and Portable
AC or battery power, take your choice. The M-10MX comes with an AC adaptor, but it can also operate on battery power (four AA batteries). Thanks to its compact body and battery operation, the M-10MX is an excellent tool for location video and/or field recording, live mixing and even podcasting with the EDIROL R-09.
Versatility
Connect a wide range of audio devices to the M-10MX, including dynamic microphones, musical instruments, consumer audio devices, video equipment and audio interfaces for computer audio. The M-10MX’s versatile back panel offers 1/4" and RCA input and output ports, plus a dedicated plug-in powered, stereo electret condenser microphone jack, suitable for use with mics such as the EDIROL CS-15. For outputs, two TRS impedance balanced 1/4" phone jacks are provided.
Digital Outputs
The M-10MX is equipped with both coaxial and optical S/PDIF 24-bit/96kHz digital audio outputs, which means you can connect it directly to the S/PDIF digital input of any audio interface, such as the EDIROL UA- or FA-series units for recording and mixing entirely in the digital domain. The M-10MX can also be connected digitally to studio monitors such as the EDIROL MA-series or Roland DS-series powered monitors.
Tech Specs
- Number of Channels: 10 in 2 out
- AD Conversion
- Sample Rate: 44.1/48.0/96.0 kHz
- Signal Processing: 24 bits
- Frequency Response
- 96.0 kHz: 20 Hz to 40 kHz (+1/-2 dB)
- 48.0 kHz: 20 Hz to 22 kHz (+1/-2 dB)
- 44.1 kHz: 20 Hz to 20 kHz (+1/-2 dB)
- Residual Noise Level: -86 dBu (IHF-A, typ.)
- Nominal Input Level
- Input Jacks 1–6: -50 to +4 dBu
- Input Jacks 1–2: -40 to +10 dBu
- Input Jacks 5–10: -2 dBu, * Maximum input level: Nominal input level + 12 dB
- Nominal Output Level: -2 dBu, * Maximum output level: +10 dBu
- Connectors
- Input Jacks 1–6: 1/4 inch phone type, unbalanced
- Input Jacks 1–2: Stereo miniature type, plug-in powered)
- Input Jacks 5–10: RCA pin type
- Main Output Jacks L, R: 1/4 inch TRS phone type (impedance balanced), RCA pin type
- Digital Output Connectors: Optical type, Coaxial type
- Headphone Jack: Stereo miniature type; DC IN (AC adaptor) Jack
- Power Supply: DC 9 V (AC adaptor), Alkaline dry battery LR6 (AA) type x 4
- Current Draw: 250 mA
* Expected battery life under continuous use:
Alkaline: 6 hours (Power save mode: On), 4 hours (Power save mode: Off)
These figures will vary depending on the actual conditions of use.
- Dimensions: 181.2 (W) x 107.5 (D) x 54.0 (H) mm;
7-3/16 (W) x 4-1/4 (D) x 2-1/8 (H) inches
- Weight: 393 g / 14 oz
- Accessories: Owner’s Manual, AC Adaptor, Ferrite Core
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
