2x2 USB 2.0 Desktop Recording Studio
Don’t sacrifice your desktop or your music.
You care intensely about your music. It’s more than a pastime – it’s a passion. Brilliantly designed, the I-ONIX Desktop Recording Series fits where it makes the most sense, between your keyboard and monitor. With all the level meters and gain controls at your fingertips when using your DAW, you'll wonder why no one ever thought of it before.
Featuring newly designed dbx® 60V high-voltage, ultra-low noise mic preamps on both channels, the I-ONIX U22 is more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D – D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.
The I-ONIX U22 can record two tracks at once and includes 2 combi-jack mic/line inputs with +48V phantom power, 2 TRS balanced line outputs, a hi-Z instrument input, a 1/4" high power headphone output, and MIDI I/O. Dedicated knobs and meters offer easy access to input and output levels and locking combi-jacks make sure that a connection is not lost in the middle of a performance.
Pantheon™ II VST/AU reverb plug-in features 6 reverb types with 16 adjustable parameters, and 35 factory presets that range from Vocal to Live Sound and Special Effects. It’s easy to complete your mix and make your music sound its best with exquisitely rich, full reverbs.
No compromise performance – ergonomic brilliance.
Pure genius.
The I-ONIX U22 contains all the necessary tools to transform your computer into a professional 24-bit/96kHz digital recording studio.
- USB 2.0 Desktop Recording Studio
- 44.1kHz to 96kHz sample rates, 24-bit resolution
- Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
- dbx® 60V high-voltage, ultra-low noise microphone preamps
- Superior sonic performance
- 2 analog combi-jacks for mic/line inputs
- 2 analog 1/4" TRS balanced outputs
- Zero latency monitoring
- Low latency ASIO drivers
- Streamlined monitor form factor puts all recording controls at your fingertips
- Separate level meters and gain control per channel
- 1 side panel 1/4" instrument input
- 1 side panel headphone output with dedicated volume adjustment
- MIDI in and out
Lexicon Pantheon II VST/AU Reverb Plug-In
Pantheon II™ makes it easy to complete your mix and make your music sound its best with exquisitely rich, full reverbs. The Pantheon II reverb plug-in continues to be a value added piece of software that gives your recording that legendary sound. It now supports both VST and Audio Unit formats and operates up to 96kHz.
- VST and Audio Units reverb plug-in
- Supports 44.1kHz to 96kHz
- 16 and 24-bit compatible
- 35 factory presets that range from Vocal to Live Sound and Special Effects
- 6 reverb types: Ambience, Chamber, Hall, Room, Plate, Custom
- 16 editable parameters per reverb type
- Full, rich reverb for dimension and depth
- Mono and stereo operation
- Efficient CPU utilization
Pantheon II ships with the I•ONIX U22, U42S, U82S, and FW810S.
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3kO balanced
Phantom Power: +48 Volts
Maximum gain: +58 dB
E.I.N. (at max gain): -125 dBu @ 58dB gain typical (150O source) -129 dBu @ 58dB gain typical A-weighted (150O source)
Maximum Input Level: +21 dBu at minimum gain
Frequency Response: +0/-1 dB, 20Hz - 20kHz
THD+N: <0.006%, 20Hz - 20kHz (mic input to main output) 0 dBu input level, Input knobs at 11 o'clock
<0.003%, 1kHz, +5 dBu input level, Input knobs at minimum, Output knob at max
Line Inputs: 1/4" TRS balanced or unbalanced
Input Impedance: 20kO balanced, 13kO unbalanced
Maximum Input Level: +32 dBu
Frequency Response: +0/-1.5 dB, 20Hz - 20kHz (reference 1kHz)
THD+N: <0.004%, 20Hz - 20kHz (line input to main output) 0 dBu input level, Input knob at 12 o'clock, Output knob at max
Instrument Input: 1/4" TS unbalanced
Input Impedance: 1MO
Maximum Input Level: +13 dBu
Frequency Response: +0/-2 dB, 20Hz - 20kHz (instrument input to main output)
THD+N: <0.004%, 20Hz - 20kHz, 0 dBu input level, Input knob at 10 o'clock, Output knob at max
Line Outputs: 1/4" TRS balanced or unbalanced
Level: >+18 dBu maximum
Impedance: 32O Balanced, 16O Unbalanced
Headphone Output: 1/4" stereo jack 350mW per channel at 50O
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements: 12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now? Try our on-line chat, or
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
|
PC
|
Mac
|
|
- Microsoft Windows® Vista 32 and XP SP2
- 1.8 GHz CPU or faster
- 1 GB RAM
- Display resolution 1024x768 pixels
- DVD-ROM drive
- USB 2.0
- Internet access required for software license activation
|
- Mac® OS X 10.4.9 or higher
- Intel® Multicore system (Required)
- 1 GB RAM
- Display resolution 1024x768 pixels
- DVD-ROM drive
- USB 2.0
- Internet access required for software license activation
|
Sound Cards
