|
|
Free mic stand! While supplies last, receive a free A-379 microphone stand when you purchase any microphone over $199 from Kelly’s Music & Computers! (Offer valid only in the US, lower 48 states. Not valid in Canada or outside the US. While supplies last.)
Cardioid Condenser Microphone
Ideal for professional recording and critical applications in broadcast, this 40 Series cardioid condenser microphone consists of the AT4900a-48 body with the AT4051a-EL cardioid element. This versatile studio performer may be used with confidence in a wide variety of professional miking applications, even under the stringent demands of modern digital recording systems. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments.
- Direct-coupled, balanced output ensures a clean signal even in high-output conditions
- Exceptionally low self-noise, very high output and fast transient response
- Accepts optional interchangeable capsules: AT4049a-EL (omnidirectional) and AT4053a-EL (hypercardioid)
- Switchable 80 Hz hi-pass filter
- Turned-brass microphone housing with black chrome plating
- The AT4051a consists of two modular subassemblies: an AT4900a-48 body and an AT4051a-EL head capsule (both available separately)
SPECIFICATIONS:
- ELEMENT: Externally polarized (DC bias) condenser
- POLAR PATTERN: Cardioid
- FREQUENCY RESPONSE: 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY: -34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE: 100 ohms
- MAXIMUM INPUT SOUND LEVEL: 146 dB SPL, 1 kHz at 1% T.H.D.
- NOISE: 19 dB SPL
- DYNAMIC RANGE (typical): 127 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 75 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 48V DC, 3.2 mA typical
- SWITCH: Flat, roll-off
- WEIGHT: 4.2 oz (120 g)
- DIMENSIONS: 6.10" (155.0 mm) long, 0.83" (21.0 mm) body diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- OPTIONAL INTERCHANGEABLE ELEMENTS: AT4049a-EL (omnidirectional); AT4053a-EL (hypercardioid)
- ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
- AUDIO-TECHNICA CASE STYLE: S1
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
