|
Hybrid
Includes both a Mac and Windows version of the program.
|
Waves captured the finest vintage and contemporary amps from Fender®, Marshall®, Mesa/Boogie®, Vox®, and more, using revolutionary sampling techniques that go way beyond standard modeling. The result is the most amazing guitar tones you will ever hear coming out of your computer. And with GTR3’s host-free Standalone ToolRack, all you need to do is plug in…and play!
Amps - 19 Classic and Contemporary Guitar Amplifiers
GTR3 lets you cut loose with the most mind-blowing guitar tones imaginable. With 19 custom guitar amps including 6 dedicated High Gain models, GTR3 is a virtual powerhouse. Just plug it in, crank it up, and turn your computer into a stack of hand-picked, world-class amps.
Clean Amps
Direct – Full-frequency, transparent tone
Clean – Based on a 1959 tweed Fender® Bassman®
Warm – Based on a boutique amp from Paul Reed Smith’s private collection
Punchy – Based on a 100W Marshall® Head
Sweet – Based on a 1968 Gibson® Skylark
Drive Amps
Edgy – Based on a Vox® AC-30 TB-2
Cream – Based on a 1966 Ampeg® Gemini II
Drive – Based on a 1964 blackface Fender® Super Reverb®
OverDrive – Based on a 1980 Marshall® JMP
Scream – Based on a custom amp from Paul Reed’s private collection
High Gain
Crush – Based on a modified Marshall® MK2 50W Stack Head
Monster – Based on a Marshall® 100W Stack
Inferno – A virtual model with super-high distortion and extremely fast cleanup
Shredder – Based on a Marshall® JMP1 pre-amp
Scorch – Based on a boutique amp from Paul Reed’s private collection
Supernatural – Based on a boutique amp from Paul Reed’s private collection
Hot – Based on a Koch® Combo
Crunch – Based on a boutique amp from Paul Reed’s private collection
Modern – Based on a Mesa® Dual Rectifier® Solo Head
16 Custom Guitar Cabinets
Play through two cabs. Record with two different mics. Flip the phase. With a huge range of speaker cabinets and perfectly matched mics, GTR3 gives you the power to mix and match equipment with unprecedented ease.
Cabinets
4 x 12” Standard – Based on a Marshall® 1960a
4 x 12” Vintage – Based on a Marshall® 1960ax with G12 Greenbacks
4 x 12” Britt – Based on an Orange® PPC412 Celestion® Vintage30
4 x 12” Inferno – Based on a custom-built cabinet
2 x 12” CB – Based on a Marshall® 1936 with G12 Greenback Celestion®
2 x 12” OB – Based on a Vox® AC-30 with Celestion® Alnico Blue
4 x 10” OB – Based on a Fender® Super Reverb® Blackface 1968 w/ CTS alnico magnet speakers
12” OpenBack – Based on a Mesa/Boogie® Mark IV, Electro-Voice speaker
15” ClosedBack – Based on a ‘60s Fender® Showman
Acme 12” Custom – Based on a custom cabinet by Ted Jenson of Sterling Sound
Acme 2 x 10” – Based on a 1962 Vox®
Acme 8” OpenBack – Based on a 1968 Gibson® Skylark
Acme 4 x 12” Cab – Based on a 1970’s HiWatt®
Acme 12” OB – Based on a mid ‘60s Ampeg® Gemini
Acme 2 x10” OB – Based on a 1965 Fender® Vibrolux Reverb Blackface
Acme Case Speaker – Based on a late ‘60s Silvertone®
11 Top Studio Mics
GTR3 delivers the unique performance of the world's most sought-after microphones by Neumann®, Brauner®, AKG®, Sennheiser®, RCA®, and more.
Bass
With 7 slamming bass amps and 6 powerful bass cabs, GTR3 takes bass amplifier modeling a giant step forward. Whatever your sound, whatever your style, GTR3 has got the full rich bass tone you’re looking for, with focused lows, punchy mids, and detailed highs. So when you’re ready to hit rock bottom, GTR3 covers all the basses.
Bass Amps
Directube – Based on a Countryman® DI into a V72 pre-amp
Activator – Based on a Sadowsky® pre-amp
SolidState – Based on a Hartke® 3500
Mo’Town – Based on the fliptop Ampeg® B15-N tube amp
SuperTube – Based on the Ampeg® SVT
Thunder – Based on a David Eden® World Tour 800
OverBass – Based on a Mesa/Boogie 400+
Bass Cabinets
Bass 8 x 10” Pro – 8 x 10” based on an Ampeg® SVT810AV
Bass 6 x 10” – 6 x 10” based on an Ampeg® SVT610HL
Bass 15” – 15” based on a late ‘60s Fender® Bassman®
Bass 15” Fliptop – 15” based on an Ampeg® B15N
Bass E15 – 15” + (4 x 10”) based on David Eden® cabinets
Bass M1516 – 10” + 15” + (2 x 6”) based on a Mesa/Boogie® 1516
Stomps
From Distortion, Doubler, and Delay to Flanger, Phaser, Fuzz, and more, GTR3 has everything you need to customize your tone. With features like Sync-to-Host BPM and Real-Time MIDI control, it’s never been easier to dial up your sound. And with Waves Tuner’s standard, chromatic, and alternate tunings, you’ll always be pitch perfect.
Distortion
- OverDrive delivers gentle growls, screaming highs, and everything in between.
- Distortion drives the intensity up a notch, for even more crunch and bite.
- Fuzz features the classic crunchy distortion of the 60s.
- Buzz recreates the retro sound of a resonant buzz box.
- Metal, with its dual distortion engine, takes you to the edge and beyond.
Modulation
- Flanger soars from light feathery swirls to extreme jet sweeps.
- Vibrolo is a combination Vibrato and Tremolo.
- Panner features pan modulation based on Waves’ acclaimed MondoMod.
- Phaser recreates the classic whoosh of the 70s.
- Octaver synthesizes up to two octaves below your input.
- WahWah features both AutoWah as well as Manual Mode, for external MIDI control.
- Chorus modulates your sound, from mildness to madness.
- Doubler delivers double-tracking effects with detuning and delay.
- Pitcher shifts your pitch in real-time, perfect for whammy style FX.
- Bass Pitcher is a real-time pitch shifter especially for bass.
Space and Ambience Effects
- Delay with BPM sync is perfect for polyrhythmic ping-pong effects.
- Lay-D delivers mind-bending reverse, pitch shift, and delay effects.
- Reverb is a realistic room emulator.
- Spring delivers the timeless sound of spring reverb.
Basics
- Gate/Comp is a gate and compressor in one.
- Compressor keeps your dynamics in check.
- Gate eliminates noise and weak signals.
- Tone is a 3-band equalizer.
- EQ is a 6-band graphic equalizer.
- Axx Press is a combination compressor and limiter.
- Volume Pedal lets you fade in or out with ease.
PRS Interface
The Waves/PRS Guitar Interface transforms your unbalanced high impedance guitar signal into a balanced low impedance signal, reducing hum and retaining your full dynamic range. The result is ultra-high fidelity at the most critical point in the signal path.™
Waves/PRS GTR Hardware Interface features:
- Transparent Pre-Amplifier
- Custom-Designed Circuitry
- Audiophile-Quality Components
- Studio-Grade Jacks
Stand Alone with GTR3 ToolRack
Now, you can fire up GTR3’s standalone ToolRack software without a host like Pro Tools or Logic. Whether you’re practicing alone, rehearsing with a band, playing live, or just jamming, the standalone ToolRack has all you need. In the studio, onstage, anytime, anywhere, the world’s greatest guitar gear is only a click away.
Drag-and-drop amps and stomps in any order, pan stereo effects to multiple cabs, save your processing chains as custom presets, and more. And ToolRack is ideal for live shows. It’s like having a warehouse full of cherry classic equipment that you can call up on the fly for every single tune.
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
|
PC
|
Mac
|
|
Intel P4 1.7 Ghz and above • AMD Athlon XP 1800 above
512 MB RAM • Win XP Pro or Home • 1024x768 minimal display resolution
|
G4 1.25 Ghz and above • 512MB RAM
OS-X 10.3.8 and above • 1024x768 minimal display resolution
|
