|
Hybrid
Includes both a Mac and Windows version of the program.
|
PHAEDRA is a ZERO-G/XFONIC virtual instrument powered by Native Instruments Kontakt Player2 and featuring over 4 gigabytes of sounds, 20,000 samples and 720 patches. This is the ultimate virtual analogue synth.
QUICK FACTS
- Featuring over 4 gigabytes of sounds, 20,000 samples and 720 patches
- Nearly every single preset has each separate note sampled so as to eliminate aliasing within the instrument’s range
- Suitable for all types of music and would enhance any producer’s sonic armory
- Categories include: Synth, bass, leads, pads, sequences, FX, DnB, Synth builder, multis
- Format: Virtual Instrument- KONTAKT PLAYER2 Audio Engine (VST 2.0, DXi, ASIO, AU, RTAS, Mac & PC)
Unhappy with the lack of raw sonic power in virtual emulations of VSTi analog synths, producer Sam Spacey set out on a three year journey to make the ultimate synth and ended up creating a monster in PHAEDRA. Constructed with the same attention to detail as a huge orchestral sample library each of the 20,000 samples has been edited and looped by hand, with loops being very long so as to extract that lovely analog randomness magic. Nearly every single preset has each separate note sampled so as to eliminate aliasing within the instrument’s range. With Kontakt 2's engine being pushed totally to the limits, the result is a library that is a full synthesizer in its own right.
PHAEDRA is suitable for all types of music and would enhance any producer’s sonic armory.
Categories include:
01 Synth 1
02 Synth 2
03 Bass
04 Leads
05 Pads
06 Sequences
07 FX
08 DnB
09 Synth Builder
10 Multis
PHAEDRA is the most complete virtual analogue synthesizer ever created. Sit back, plug in and enjoy!
Notes from Producer Sam Spacey:
PHAEDRA was primarily born out of two of my frustrations.....
1. The lack of raw sonic power in virtual emulations of analog synths
2. Sloppy MIDI timing of external analog synths under modern computer operating systems
I set about making a personal library for the dance releases I was working on at the time. A few of my producer friends managed to try out some of my presets and ended up using them a lot on their releases.
After finding myself more and more unable to satisfy my producing needs with soft synths I found myself relying more and more on the small number of sampled presets I had made from my old MiniMoog D for bass sounds. One oscillator from a Moog seemed to sit so nicely in a mix without me having to throw loads of EQ or compression at it.
It seemed that to get the same amount of sonic energy for a bassline using one oscillator on certain VSTi analog emulations required a lot more volume and headroom that I wasn't about to give up, not to mention the time taken in compressing and EQ'ing just to get the virtual synths to sit right in the mix. The analog samples just seemed to sit in the mix so much easier.
I was also getting very frustrated with so called "sample accurate" MIDI interfaces that were anything but sample accurate. No matter how I tried to set up the interface it was never tight on timing. In the days the Atari it was tighter but also there was no sample accurate audio then so much as there is now. And MIDI just comes across even looser when put up against a modern sequencer's sample accurate audio and VSTi's.
So… I spent a few weeks making a load of my favorite patches in Kontakt 1. This worked really well and I was really considering selling my analogs again. After constant pestering from friends to make more presets I decided to pitch my idea for a library based on analog synths to Zero-G. Nothing new, I hear you say.... but I wanted to go about this with the same attention to detail as say an orchestral sample library developer would:
1. Hand looped and hand edited, with loops being very long so as to extract that lovely analog randomness magic.
2. Nearly every single preset has every note sampled so as to eliminate aliasing within the instruments range.
3. Very high quality A to D converters from Lynx 2 sound card used for library.
4. Unique vel/modulation source to sample start so as to use the actual analog synths filter bringing great flexibility and playability.
5. I feel that I came at this library from a composer/producer's point of view so presets are designed to be used and not to just sound good on their own.
6. Convolutions were made of the actual units I use in my productions, other devices were hired in to have convolutions made from them, but FX have NOT been plastered all over this library, they have only been used when they are a part of the sound rather than making a normal preset sound better by just sapping reverb on it!
7. With Kontakt 2's engine being fully exploited I was able to get a library that was not just for playing back recordings, but is a full synthesizer in its own right. This gives the product huge longevity as I feel its strengths are in using the presets as building blocks or starting points for your own presets.
8. I wanted the library to be able to be controlled by external controllers like say the Novation 61SL which I used a lot to make the presets. All parameters use smoothing so as to eliminate stepping.
9. All the presets 'move', that is to say, they can have the sound altered by either velocity, mod wheel or aftertouch.
10. All the samples were taken raw from the analog synths with no enhancing or EQ'ing. I prefer to let the producers who will use this make their own decisions on EQ.
11. 20,271 individual samples were recorded over a 12 month period, over 4.1gb of raw samples.
12. No duplicates in any of the raw recording samples, this library is not padded out to make it look bigger.
13. I stopped at 720 presets in the following presets folders: Synth 1, Synth 2, Bass, Leads, Pads, Sequences, Fx, DnB (bonus), Synth Builder (for starting off with raw settings for your own creations) and a Multi folder.
14. Multi is where the magic happens by stacking presets on top of each other.
15. This library is very efficient due to the lack of re-sampling needed by Kontakt 2 as a result of total overkill in multisampling. This library is based on no particular Electronic genre and would lend itself well to any style.
PROGRAMMING NOTES:
Sound Quality
All the sounds were recorded and processed at 16-Bit resolution and 44.1 KHz sample rate.
Organization
The Instruments list (which can be viewed by clicking on "Instruments List PDF") groups the sounds into categories. Each category has a different colored GUI, for example the Synth category has a red interface, Leads are blue, Bass are grey and Pads are green.
The categories are as follows:
01 Synth 1
02 Synth 2
03 Bass
04 Leads
05 Pads
06 Sequences
07 FX
08 DnB
09 Synth Builder
10 Multis
Memory Size
All programming has been carried out with the samples loaded into RAM. However, Direct from Disk (DFD) functionality is available thereby enabling the streaming of the samples direct from your hard disk drive.
Modulation Wheel Assignments
Every single instrument has the Modulation Wheel assigned to a function. This gives a lot of dynamic control over the character of the sound. Please try out the modulation wheel when playing each patch. The Mod Wheel may be assigned to one of several different controllers including Tune LFO, Filter Cutoff, Pan and Volume depending on the patch in question.
Polyphony
All instruments have unlimited polyphony except for a selection of patches from synths that were originally monophonic and some bass sounds which have thus been programmed as monophonic. If you wish to increase the polyphony, please do so.
Multis
Up to 64 instruments can be combined in a Multi giving a vast array of possible combinations of the supplied single instruments. For example try combining a couple of bass instruments for some really fat and thunderous sounds.
CPU Load
The exact CPU load of any given instrument depends on a myriad of factors - the power of your computer, notes played, complexity of the instrument etc.
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now?
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
